Guide: Stop ActiveCampaign From Auto-Launching in a New Chrome Tab

Share This Post

Ever find yourself frustrated when you open Chrome and ActiveCampaign automatically opens in a new tab? You’re not alone. It’s a common issue that many users face, and it can be quite annoying when you’re trying to streamline your browsing experience.

In this article, you’ll find a step-by-step guide on how to stop ActiveCampaign from opening a new tab every time you launch Chrome. We’ve done the research, so you don’t have to. With a few simple tweaks to your settings, you can regain control over your browser and improve your productivity. So, let’s dive in and solve this pesky problem once and for all.

Why does ActiveCampaign open in a new tab?

Ever wondered Why Does ActiveCampaign Open in a New Tab? Let’s dig a bit deeper into this prominent question. Technology often has a mind of its own, especially when it’s about browsers and extensions. Your browser settings, more specifically those pertaining to default pages and tabs, have a significant role to play here.

If ActiveCampaign is opening in a new tab every time you launch Google Chrome, it’s likely due to your settings. Websites can automatically open up when a specific extension is enabled within the browser. If you’re using ActiveCampaign’s extension for Chrome then that’s the most likely cause.

Another potential reason could be that ActiveCampaign is set as your default landing page. A landing page is the first webpage that appears when you open your browser or a new tab.

Let’s not forget the ever-pertinent role of cookies! Cookies stored on your system by ActiveCampaign could be causing the tab to open automatically. How, you ask? Well, websites often use cookies to remember key details and preferences for future visits. Therefore, ActiveCampaign may be using cookies saved on your system to open in a new tab every time you’re launching Google Chrome.

Understanding the reasons why ActiveCampaign opens in a new tab upon launching Google Chrome is pivotal. Tackling the issue effectively requires a grasp over its causes.

So, now that you’ve got a good handle on why this issue is cropping up, it’s time to navigate ways of stopping ActiveCampaign from auto-launching. Stay tuned for the next section to learn handy, easy-to-implement tweaks to regain control over your browser.

Step 1: Accessing Chrome settings

Proceed by navigating your way through Google Chrome’s settings. Let’s unravel this mysterious obstacle that stands in your way to a streamlined browsing experience.

To start, you’ll want to open Google Chrome. Observe the top-right corner of your screen. You’ll see three stacked dots that open the browser menu when clicked. Don’t let these simple dots fool you, they’re the gateway to multiple settings you might not have ventured into yet. Click on these, then scroll down and tap on the ‘Settings’ option.

Feel your way through this helpful section. The “On startup” segment under settings is the place you need to reach. Your Explicit focus should fall on this section. It enables you to change what your browser does when it starts.

Here, three options will greet you:

  • Open the New Tab page
  • Continue where you left off
  • Open a specific page or set of pages

Compatibility issues won’t be a worry. You can change these settings for whichever device you’re using whether it’s a PC, Mac, or mobile device.

Don’t fret about getting lost or making irreversible changes. Your browser’s default settings are always just a click away should you miss a step or wish to revert to your original settings. Take your time, explore, and familiarized yourself with each choice.

Step 2: Managing your startup settings

Once you’re in the ‘Settings’ of Google Chrome, knowing where to look can feel like a maze. However, finding the ‘On startup’ subsection is where the path to resolution begins. This section gives you full control over what your browser does each time it starts. The functionality it provides can make your browsing experience smooth, catered to your preferences, and free from automatic launches of ActiveCampaign.

You’ll find this under the ‘Settings’ umbrella. To get there, navigate through the ‘Advanced’ section at the bottom, then into ‘On startup’. This might differ slightly on a phone or tablet, but it’s situated within the same ‘Advanced’ section.

Within the ‘On startup’ options, you’ll see several choices:

  1. “Open the New Tab page”
  2. “Continue where you left off”
  3. “Open a specific page or set of pages”

Look at these choices carefully. If you’re dealing with ActiveCampaign popping up every time you launch Chrome, the culprit is likely the third option: “Open a specific page or set of pages”. This option instructs Chrome to launch designated sites each time it starts up. It’s very likely ActiveCampaign is listed as one of these sites.

To rectify this, click on “Open a specific page or set of pages”. If ActiveCampaign is listed, hit the ‘Remove’ or ‘Delete’ button next to it, depending on your device.

At this stage, you’re halfway through stopping ActiveCampaign from automatically launching. The next step involves understanding and managing browser extensions, another significant piece of the puzzle. It’s important to know this solution is reversible. If you decide later to enable ActiveCampaign to open with Chrome, simply add it back to the list.

By mastering these settings, you can personalize your browser to function in line with your requirements, giving you the ideal browsing experience.

Step 3: Disabling ActiveCampaign from opening in a new tab

By this point, you’ve mastered the ins and outs of your Google Chrome’s “On startup” settings. However, ActiveCampaign may still insist on launching automatically. If this is the case, there’s an additional step that’s bound to fix the issue – disabling ActiveCampaign from opening in a new tab.

Firstly, head over to the Extensions manager in Google Chrome. You can find this by clicking on the three-dot icon in the top-right corner of your browser, hovering over More tools and then clicking on Extensions. This will open up a new tab with a list of your installed extensions.

You’ll find ActiveCampaign among these extensions. Now, you have two choices – either you can disable ActiveCampaign or remove it completely from your extensions. Disabling it will just turn it off – meaning it can be turned back on at any time.

To disable it, locate the ActiveCampaign extension within the Extensions tab. Flip the switch on the bottom-right corner of its box from blue to gray. A pop-up will appear, asking you to confirm your decision. Click on Turn off and voilà – the extension will be disabled and it should no longer automatically open in a new tab.

If you want to remove the extension entirely, simply click on Remove in the ActiveCampaign extension’s box. A confirmation pop-up will appear, asking you if you’re sure about removing the extension. Click on Remove again, and you’re all set.

Remember, if you ever change your mind and want ActiveCampaign back, you can always reinstall or reactivate it. It’s just about finding the balance between convenience and control in your browser. With these steps mastered, you hold the reins of your browsing experience more firmly than ever. Be proud! Moving on, you’re about to delve into even more ways to tailor Google Chrome to your tastes and requirements.

Step 4: Clearing your browsing data

At this stage you’ve effectively taken care of the “On Startup” settings and managed your browser extensions. However, Chrome may still be clinging on to some residual data that’s causing ActiveCampaign to persistently pop up. For this, clearing your browsing data may prove to be a fruitful solution. Here, we’ll take you through the same.

First, locate the hamburger menu (three vertical dots) on the top right corner of your Google Chrome. A list of options will appear. Choose More tools, and from its submenu select Clear browsing data. This step is crucial in troubleshooting the ActiveCampaign new tab problem.

Upon clicking, a new pop-up window will emerge with the title ‘Clear browsing data’. Here, you have two tabs named ‘Basic’ and ‘Advanced’.

We’ll recommend you go for the ‘Advanced’ tab. It gives you more control over what data you want to clear.

A markdown table for the options found under ‘Advanced’ tab is as follows:

Browsing historyClears the list of websites that you’ve visited
Download historyRemoves the record of files you’ve downloaded
Cookies and other site dataDeletes information sites store on your system
Cached images and filesCleans copies of pages, images, and other media cached by Chrome
Passwords and other sign-in dataRemoves login details for websites
Autofill form dataErases information you’ve entered in forms
Site settingsWipes out settings for websites
Hosted app dataDeletes data from applications hosted by Chrome

Check all the boxes. By doing so, you ensure you remove all types of data that may contain ActiveCampaign information. Click the ‘Clear data’ button once you’re ready.

Remember, clearing your browsing data isn’t something to be fearful of. It just creates a fresh start for your browser, free of any potentially problematic data.

Next, we take a look at the privacy settings in Google Chrome.


You’ve now got the skills to stop ActiveCampaign from auto-launching in a new Chrome tab. By adjusting the “On startup” settings and managing your browser extensions, you’re in control. Don’t forget, removing ActiveCampaign from your startup pages and disabling the extension isn’t permanent. You can reverse these changes anytime. Clearing browsing data is your final step to ensure a clean slate. Remember, it’s safe and effective, giving your browser a fresh start. So go ahead, apply these steps and enjoy a more streamlined browsing experience.

How can I access the settings in Google Chrome to resolve an automatic tab opening issue?

To access Google Chrome’s settings, first, click on the three dots at the top right corner of the browser, then choose “Settings.” Within settings, navigate to the “On startup” section to manage pages that automatically launch at startup.

What should I do if ActiveCampaign keeps automatically launching in Chrome?

If ActiveCampaign keeps launching in Chrome, check your “On startup” settings. Make sure ActiveCampaign isn’t listed under “Open a specific page or set of pages.” If it is, remove it.

How can I manage browser extensions in Google Chrome?

You can manage browser extensions by going to the chrome menu, then click on “More Tools” and from the dropdown select “Extensions.” Here, you can disable or remove the ActiveCampaign extension.

How can I clear browsing data in Google Chrome?

To clear browsing data in Google Chrome, first, open settings. Under the “Privacy and security” section, find and click on “Clear Browsing Data.” To have more control over the data you wish to clear, choose the “Advanced” tab.

What are the data types that I can clear under the “Advanced” tab when clearing browsing data?

Under the “Advanced” tab when clearing browsing data in Google Chrome, you can opt to clear browsing history, download history, cookies and other site data, cached images and files, passwords and other sign-in data, autofill form data, site settings, and hosted app data.

Is it safe to clear browsing data in Google Chrome?

Yes, it’s safe to clear browsing data in Google Chrome. It helps remove residual data that can cause certain pages to load incorrectly, and also provides a fresh start for your browser.

More To Explore

Unlocking Email Marketing: A Comprehensive Guide on Using ActiveCampaign Code

Learn to harness the power of ActiveCampaign’s code to personalize and automate your email marketing campaigns. This informative guide demystifies coding, offering ways to increase open rates, leverage workflow automation, and monitor campaign results. Perfect for both the tech-savvy and non-technical user, mastering ActiveCampaign can lead to tailored, efficient email marketing strategies.

Read More ⟶

About Me

Increase revenue by automating the customer experience!
The Best Email Marketing Tools Reviewed— Here’s a thorough and unbiased examination of the best email marketing software.

Recent Posts

Ready to
Start Your Journey?

These guides are updated weekly and monthly depending on the updates and releases of new soft wares.

Our goal is to be your one-stop-shop for your email marketing needs by proving tips and tricks as well as objective reviews for writing tools. We want to bring you the latest news and happenings in the world of automated email marketing software.

Hopefully, you find our write-ups as tools that can save you hundreds or even thousands of hours of research and trial and error.