Mastering ActiveCampaign: Ignoring Recurring Misspelled Words in Your Document

Share This Post

Ever found yourself wrestling with a word that’s constantly flagged as misspelled in ActiveCampaign, even when it’s not? It’s a common issue, especially when dealing with industry-specific jargon or brand names that aren’t in the dictionary.

In this guide, you’ll learn how to ignore a misspelled word in the entire document in ActiveCampaign. It’s a simple process that’ll save you time and frustration, letting you focus on crafting engaging emails for your audience. So, let’s dive right in and solve this little hiccup once and for all.

Step 1: Understanding the Issue

Let’s start with the foundation. You’re drafting a compelling email in ActiveCampaign, and suddenly, you’re interrupted by those red squiggly lines underlining your words. These are words you’re sure you’ve spelled correctly. Or maybe they’re industry-special jargon or unique brand names. Yet, ActiveCampaign decides they are misspellings.

It’s normal to feel frustrated. Those pesky red lines not only break your flow but also cause unneeded distractions. During your busy day, you can’t afford to waste precious time battling a spell checker that flags perfectly valid words. So, it’s time to arm yourself with some facts.

To fight any problem, you first need to perceive it from the right angle. The spell check in ActiveCampaign, or any other application for that matter, relies on a pre-loaded dictionary. This dictionary has a multitude of words, but it is not all-inclusive. Your distinctive industry-specific jargon, unique brand names, or recently coined words may not be part of it yet. The spell check flags these words as ‘misspelled’, although you are very sure they’re not.

Let’s look at an example. You’re in the automotive industry, and you use words like “drivetrain”, “aftermarket”, “turbocharged”, or brand-specific terms such as “Quattro” (Audi) or “SkyActiv” (Mazda). These may not exist in the standard dictionary ActiveCampaign uses, thus they get flagged.

Now that you have a deeper understanding of why these words get flagged, you’re ready to address the issue. The solution could be much simpler than you imagine. You can train ActiveCampaign to ignore your ‘correctly misspelled’ words. How do you do this? We’ll explain in the next sections of the article. Just hang on and keep reading.

Step 2: Identifying the Misspelled Word

In the process of fine-tuning your email campaign in ActiveCampaign, it’s critical that you know how to pinpoint the “misspelled” word. Once you’ve drafted your email content, ActiveCampaign’s automatic spell check kicks in to scan your text.

Here’s something to note. The system does its job based on a pre-loaded dictionary which may not include your industry-specific jargon, unique brand names, or recently coined words. You might have used these words accurately but the system flags them as incorrect. It’s not a flaw on your part but simply a limitation of the system’s dictionary.

Take for instance, in the automotive industry, terms like “autonome” and “drivetrain” may cause a snag. They’re accurate and standard in context, yet may be flagged as incorrectly spelled. The indicator is a red underline that crops up beneath the word in question.

This step of identifying the potential “misspelled” word is crucial. It sets the pace for the subsequent steps towards training ActiveCampaign to ignore the “correctly misspelled” words in your whole document. This way, not only will you save time and avoid frustration, but also keep your workflow smooth and efficient.

Next, we’ll dive into the method of making ActiveCampaign skip over these flagged words. It’s simple, straightforward, and a real time-saver. Your targeted email campaign will be up and running with no unnecessary interruptions. Your unique industry language will remain intact, unabridged and unedited. And that’s what we call a win-win!

In the meantime, make sure to keep an eye on those underlines. They’re your guiding compass in this journey of preserving your brand’s unique language.

Step 3: Adding the Word to the Custom Dictionary

Once you’ve identified the “misspelled” word or brand jargon, and verified that it’s spelled correctly, the next step is to tell ActiveCampaign’s spell-checker to back off and get used to seeing it. You can prevent the platform from flagging the specific word as misspelled by adding it to the custom dictionary.

What’s intriguing about this feature is that it’s not restricted to one email or campaign, but spans across the whole platform. So once you add the identified word, you’ll no longer have to repeat the process for future documents or campaigns.

Let’s plunge right into how to add the word to the custom dictionary in ActiveCampaign.

Sub-step 1: Finding the Dictionary Tab

In the top navigation, go to “Preferences” and then to the “Dictionary” tab that’s tucked away in the submenu. This may not be a place you visit frequently, but it’s essential to this process.

Sub-step 2: Adding Your Word

In the dictionary tab, you’ll see an option to “Add New”. Click on this and a text box will appear. Here’s where you’ll enter the word that’s been erroneously flagged as misspelled. Afterwards, click “Save” and breathe a sigh of relief.

Your word has now officially received ActiveCampaign’s stamp of approval. It has been added to the dictionary and got immunity from being flagged in the future.

And just like that! You’re in control of your unique language. The spell-check won’t disturb you with false errors for any saved words through your campaigns.

In the next section, we’ll talk about how this process impacts the overall efficiency of campaigns in ActiveCampaign.

Step 4: Verifying the Word is Ignored

After adding the special word to your custom dictionary in ActiveCampaign, it’s crucial to verify if the system indeed overlooks that ‘supposedly’ misspelled word in the entire document. This step assures you that all future documents and campaigns won’t flag it as an error – thereby saving you time and preventing unnecessary frustration.

Firstly, check your recent document where the word previously appeared as a spelling error. Hover your cursor over the word in question, and you should no longer see the red underline that indicated a spelling mistake. If you still notice the squiggly line, it’s time to troubleshoot – don’t fret, it’s likely a minor issue that’s easily rectified.

Should this occur, revisit your custom dictionary settings and ensure that you’ve precisely entered the spelling of the word. Small mistakes are common, especially with tricky industry-specific jargon or complex brand names.

If you’re cautious like most meticulous marketers, you would like an extra level of confirmation. Hence, you should create a test email campaign. Draft an email including the word that was previously marked as misspelled. As you’re composing this email in ActiveCampaign, scrutinize if the system flags the word as incorrect.

This precautionary measure will give you the confidence to use your unique vocabulary freely in future campaigns, without concern for disruptive spelling error flags.

Likewise, on a broader scale, pruning your custom dictionary on a regular basis is recommended. Adding relevant words and removing outdated language keeps your campaigns current and accurate. This habit ensures that your brand language evolves along with industry trends, and remains state-of-the-art.

Weaving unique words into your campaigns pushes your creative boundaries and solidifies your brand’s distinct identity. With simple tools like a custom dictionary in ActiveCampaign, you’re in full control of molding your bespoke brand language.

Step 5: Applying the Ignored Word Across the Document

The process of fully incorporating the ignored word into your ActiveCampaign document comes next. It’s here you’ll apply what you’ve learned so far and take it to a broader context. By engaging this step, your whole document will no longer red flag the word you’ve chosen to ignore. This great capability makes your job easier but remember: a successful application demands accuracy and precision.

Here’s how to roll:

  • Identify the ignored word throughout your document: Use the “Find” feature (” CTRL + F” on most keyboards) to locate every instance of your ignored word. Keep a keen eye: context can be crucial in deciding whether a word should indeed be ignored or not.
  • Apply the ignore feature: Once the word is found, simply right-click, and navigate to “Spelling” to select “Ignore All”. This will ensure that the word is overlooked throughout the entire document. It’s crucial to execute this for every isolated occurrence.

Keep up this process until you’ve scanned your entire document. You’ll notice the red underline disappear, signalling the effective functioning of your custom dictionary. Your document now mirrors a clean, professional appearance, free from any distracting red underlines.

Walking into the realm of email marketing you’ll also find this tactic dearly useful. Channeling the custom dictionary settings across several campaigns can provide consistent brand language as you leverage this powerful tool. It also paves the way for personification of the brand language, carving out a strong identity in the marketplace.


Mastering the art of ignoring a misspelled word in ActiveCampaign is a game-changer. It’s not just about avoiding pesky red underlines; it’s about maintaining brand consistency across all your email marketing campaigns. By using the “Find” feature, you can easily pinpoint each instance of the word and apply the ignore function. Remember, it’s essential to do this for every single occurrence. With the custom dictionary settings in your toolkit, you’re well-equipped to craft a strong brand identity in the marketplace. So go ahead, make the most of these features and let your brand’s unique language shine through.

Frequently Asked Questions

1. What is the main focus of the article?

The article focuses on explaining the process of incorporating an ignored word into an ActiveCampaign document. It demonstrates the use of the “Find” feature to identify that word and the application of the ignore feature to prevent its unnecessary appearance throughout the document.

2. Why is it important to follow this process for every word occurrence?

Following this process for every word occurrence ensures consistency and prevents the accidental inclusion of the ignored word. It also aids in maintaining streamlined document editing and proofreading.

3. How can applying custom dictionary settings across campaigns benefit one’s brand?

Applying custom dictionary settings across multiple campaigns helps to maintain consistent brand language and carve out a strong identity in the marketplace. It ensures the uniform integration of specific words or phrases aligned with the brand image.

4. What roles do the “Find” and “Ignore” features play in this process?

The “Find” feature helps to identify every occurrence of the ignored word in the document. The “Ignore” feature, when applied, ensures that the identified word is not highlighted or caught in any future checks conducted on the document.

5. Why is maintaining consistency in brand language important?

Consistency in brand language aids in creating a strong and recognizable identity in the marketplace. It ensures that all communication reflects the brand’s image, reinforcing credibility and fostering trust among potential customers.

More To Explore

Unlocking Email Marketing: A Comprehensive Guide on Using ActiveCampaign Code

Learn to harness the power of ActiveCampaign’s code to personalize and automate your email marketing campaigns. This informative guide demystifies coding, offering ways to increase open rates, leverage workflow automation, and monitor campaign results. Perfect for both the tech-savvy and non-technical user, mastering ActiveCampaign can lead to tailored, efficient email marketing strategies.

Read More ⟶

About Me

Increase revenue by automating the customer experience!
The Best Email Marketing Tools Reviewed— Here’s a thorough and unbiased examination of the best email marketing software.

Recent Posts

Ready to
Start Your Journey?

These guides are updated weekly and monthly depending on the updates and releases of new soft wares.

Our goal is to be your one-stop-shop for your email marketing needs by proving tips and tricks as well as objective reviews for writing tools. We want to bring you the latest news and happenings in the world of automated email marketing software.

Hopefully, you find our write-ups as tools that can save you hundreds or even thousands of hours of research and trial and error.